Acacia Wood Vs Teak Wood – WoodTours

If you are planning on buying a new wooden cutting board or furniture, it can be tricky to choose a type of wood. Acacia wood and teak wood are two popular choices that people lean towards these days. It is important to know the difference between Acacia and the highly popular Teak wood.

Acacia Wood Vs Teak Wood

This can make things difficult for them because they may not be able to notice the subtle differences between the Acacia and Teak wood. There are different ways in which you can be able to tell the difference between Acacia and Teak wood like their appearance, hardness, density, durability, resistance to harmful elements and cost, etc./

Furniture

The difference between Acacia and Teak wood furniture is its appearance, cost, durability, hardness, and resistance to harmful elements.

Appearance

Acacia wood furniture has a smooth, satin-like appearance due to its fine grains. Teak wood furniture has a coarse texture with large grains that are visible on the surface.

Color and Grain Pattern

Acacia wood furniture comes in shades of brown and tan, while teak wood furniture comes in shades of gold and honey. Acacia’s color fades with age and exposure to sunlight, while teak darkens with age and exposure to sunlight. The grain pattern of acacia wood runs straight across the board, while the grain pattern of teak can vary significantly from one board to another.

Density, Hardness, and Resistance

The density of Acacia is about half that of Teak. Acacia wood is a little softer than teak wood. This means you can sit in Acacia wood furniture without cushions while Teak furniture requires cushions because it is hard to sit on.

In terms of hardness and resistance, Teak is slightly harder than Acacia, because of its higher density. Acacia wood also has a very high resistance to fungus and bacteria, making it an ideal choice for outdoor furniture, but since it is not as dense as Teak. It may be prone to scratches and dents if not properly taken care of.

Furniture Durability

Acacia has high durability ratings when it comes to insect resistance and rot resistance. However, it can be dented by heavy use. Teak has better ratings for insect damage, rot resistance, and denting than acacia does especially if it’s outdoor furniture. So it’s a better choice for high traffic

Furniture Cost

The cost of acacia wood furniture is quite low compared to teak wood furniture. Acacia wood is cheaper than teak. Teak wood furniture is also very durable, however, they will have a higher cost than acacia wood. If you want to spend more money, then teak wood might be a good option for you.

Cutting Boards

Acacia and teak are two of the most popular types of wood used to make cutting boards. Each offers its own unique benefits, and they both have disadvantages as well.

Cutting Boards Color Variation and Grain Pattern

Acacia typically has a medium brown color to it with darker striping. Acacia wood has an open grain pattern and can have some small holes in it, which will allow food to get stuck in it. This is not a problem as long as you scrub it well and make sure you clean all the food out of it before drying it off.

Teak wood cutting boards have a much more pronounced grain pattern than acacia. The edges will be more rounded compared to the sharp edges on acacia boards. Teak wood is a very oily wood that contains natural oils within it that help makes it water-resistant. These oils will also help prevent stains from forming on your cutting board as well as bacteria from growing inside the grain pattern.

Cutting Boards Resistance against Harmful Elements

Acacia has a natural varnish that makes it resistant to moisture, stains, and bacteria. But still, you must oil the board regularly (every 10 times you use the board) for this varnish to stay in place. The more you oil, the longer the cutting board lasts. 

Teak also has a natural varnish that makes it resistant against moisture, stains, and bacteria. Teak boards don’t need to be oiled as often as Acacia boards do.

The Hardness of Acacia vs Teak Butting Board

Acacia and teak are commonly used for cutting boards, both of which are very durable and hardwoods. While both kinds of wood are relatively hard, acacia has a Janka rating of 2200 while teak comes in at 1100. This means that acacia is twice as hard as teak and will be less prone to knife damage. However, if you’re looking for a softer surface to protect your knives, teak might be a good option for you.

Cost of Cutting Boards

Teak is usually more expensive than Acacia because it has better properties such as durability, strength, and hardness. It is also one of the most common materials used in cutting boards due to its high quality and durability.

Acacia wood, on the other hand, is less durable than Teak and has a lower price point. This means that it will not last as long as Teak but will cost less money over time. Teak cutting boards can cost as much as $150, whereas you can get a good acacia cutting board for $20.

Conclusion

Teak is preferable for furniture, and especially for high-use furniture because it is more resistant to termites. Acacia is softer and thus prone to scratches. But due to its lower cost, Acacia is better suited for cutting boards and crafted items such as boxes. Teak is a great choice for those who are wanting a quality long-term piece of furniture to last decades, and Acacia is the best choice for people looking for a cost-effective lower-priced furniture piece to stand the test of time

Frequently Asked Questions